Austin Foundation Repair Directory
Menu

Steel push piers

Steel push piers are steel tube sections driven hydraulically into load-bearing soil or rock, using the weight of the structure as the resistance that pushes each section down. They are used to stabilize and lift settling foundations.

Steel push piers are a foundation repair method in which short steel tube sections are pressed into the ground one after another with hydraulic rams. The rams push against the weight of the house or building, so the structure itself provides the resistance needed to drive each section down. Installation continues until the pier reaches a load-bearing stratum, which is a soil or rock layer strong enough to carry the load without further settling.

The approach matters because a foundation that has settled usually sits on soil that can no longer hold it. Push piers transfer the load past that weak layer to deeper, firmer ground. Once the pier is seated, the foundation can be raised back toward level using the same hydraulic system, then fixed in place with brackets attached to the footing or slab.

In the Austin area, push piers are most often associated with slab foundations on expansive clay, where seasonal shrink and swell causes movement. Providers who work on these jobs typically describe the piers by their steel tube sections, their depth, and the hydraulic equipment used to install them. You can browse local firms under slab foundation repair providers in the directory.

Push piers are distinct from helical piers, which are screwed into the ground rather than pressed. Both aim to reach stable soil, but the installation method and the equipment differ.

}

Related on this site