Austin Foundation Repair Directory
Menu

What is slabjacking?

Slabjacking is the general term for raising settled concrete slabs, such as driveways, sidewalks, patios, and garage floors, by pumping a fill material through small holes drilled into the slab to fill the void underneath. Mudjacking and polyurethane foam injection are the two most common methods used to do it.

Slabjacking is the umbrella term for lifting concrete that has sunk, tilted, or pulled away from its base. A technician drills small holes, usually about an inch in diameter, through the slab and pumps material into the space beneath it. As the material fills the void and pressure builds, the slab rises back toward its original level.

The term covers any injection method used this way. Mudjacking is the older and best-known version, which uses a slurry of soil, sand, and cement pumped under the slab. Polyurethane foam injection is the newer alternative, which expands into a lightweight material that lifts the concrete and fills voids without adding much weight. Both count as slabjacking because the goal and the basic process are the same, even though the fill differs. Many people use "mudjacking" as a catch-all, but it is only one type of slabjacking.

The work matters because settled concrete creates trip hazards, drains water toward foundations, and can crack further over time. Slabjacking is often a lower-disruption fix than tearing out and pouring new concrete, which is why it shows up so often on driveways, walkways, pool decks, and garage floors in the Austin area, where expansive clay soils are a common cause of settling.

If you are looking for firms that do this work, the concrete leveling and mudjacking providers listed in this directory are a good starting point.

Related terms include concrete leveling, mudjacking, and foam jacking, which are often used interchangeably in marketing but describe specific methods within the broader slabjacking category.

Related on this site