Differential settlement
Differential settlement is the uneven sinking of different parts of a foundation, so one section drops relative to another. It is a common cause of cracked walls, sticking doors, and racked framing.
Differential settlement happens when one part of a foundation sinks more than the rest of it. A house is designed to settle evenly as a single unit. When the soil under one corner, one wall line, or one pier softens, shrinks, or loses support while the soil beneath other sections holds steady, the structure bends and twists to follow the low spot.
In the Austin area, the usual culprit is expansive clay. These soils swell when wet and shrink during dry spells, and that movement is rarely uniform across a single lot. Drainage that pools near one side of the house, a dry stretch that pulls moisture from beneath a sunny exposure, or a large tree whose roots draw water from one section can all push one part of the slab or pier system lower than its neighbors.
The reason it matters is that the damage shows up above the ground first. As one section drops, the walls, beams, and floor framing above it have to flex. Drywall and mortar are stiff and crack along diagonal lines, often starting at the corners of doors and windows. Doors and windows stop closing properly because their frames have racked out of square. Floors can slope noticeably, and in severe cases the gap between a wall and the floor widens.
Differential settlement is not the same as normal, even settling that every house goes through. The concern is the difference in movement from one point to another, because that difference is what puts stress on the structure. A foundation can sink a good deal and still be fine if it sinks evenly.
Homeowners usually find out about it by noticing cracks, sticking doors, or sloped floors, and a licensed foundation contractor typically confirms it with a level survey. Providers who handle slab and pier work are listed in our slab foundation repair category.
$body$